Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FLEX NORYL™ Resin WCV063 - Asia - (PPE+TPE) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for FLEX NORYL™ Resin WCV063 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Flex Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
FLEX NORYL™ WCV063 resin is a flexible, non-reinforced extrusion grade of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE) with a Shore D Hardness rating of 63. FLEX NORYL WCV063 resin was developed for evaluation in automotive wire + cable applications requiring ISO6722 Class A or B. It exhibits ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, and good dielectric strength. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 33 g/10min ASTM D 1238
温度 280 °C -
负载 5 kg -
机械性能价值单位Test Standard
ASTM数据
拉伸模量 840 MPa ASTM D 638
屈服应力 28 MPa ASTM D 638
断裂拉伸强度 28 MPa ASTM D 638
断裂伸长率 90 % ASTM D 638
弯曲模量 720 MPa ASTM D 790
邵氏硬度D 63 - ASTM D 2240
悬臂梁缺口冲击强度, 1/8 in 560 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 170 J/m ASTM D 256
温度 -30 °C -
热性能价值单位Test Standard
ASTM数据
DTUL @ 66 psi 82 °C ASTM D 648
DTUL @ 264 psi 56 °C ASTM D 648
其它性能价值单位Test Standard
密度 1030 kg/m³ ASTM D 792
典型数据
耐化学试剂
通用耐化学性
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.